Directions to Innsbrook Technical Center

Dominion's corporate office just west of Richmond, Va., is the Innsbrook Technical Center. Its location and proximity to our downtown office are shown below.

• From Richmond International Airport (about 30 minutes) 

1. Travel north on Airport Drive and exit onto Interstate 64 West. 
2. Pass through the city and look for the Short Pump / Rt. 250 Exit. Refer to the Downtown Richmond map.   
3. Take the first exit (Rt. 250 East), enter Rt. 250 and move immediately to the far left lane. 
4. Turn left at the first traffic light, continue straight and follow company signage. 

• From Dominion's One James River Center 

1. Circle One James River Center until you reach the side closest to the river. Move to a left lane, go through the traffic light and bear left (Note signs) onto Downtown Expressway. Refer to the Downtown Richmond map. 
2. Follow expressway until it forks into I-64 and I-95. Bear left onto I-64 West. 
3. Look for the Short Pump / Rt. 250 Exit. 
4. Take the first exit (Rt. 250 East), enter Rt. 250 and move immediately to the far left lane.
5. Turn left at the first traffic light, continue straight and follow company signage. 

• From Petersburg on Interstate 95 North 

1. Take the Downtown Expressway Exit (Exit 74A). Refer to the Downtown Richmond map. 
2. Follow expressway until it forks into I-64 and I-95. Bear left onto I-64 West. 
3. Look for the Short Pump / Rt. 250 Exit.   
4. Take the first exit (Rt. 250 East), enter Rt. 250 and move immediately to the far left lane.   
5. Turn left at the first traffic light, continue straight and follow company signage. 

• From Washington on Interstate 95 South 

1. Take the exit onto I-64 West. 
2. Look for the Short Pump / Rt. 250 Exit.   
3. Take the first exit (Rt. 250 East), enter Rt. 250 and move immediately to the far left lane.   
4. Turn left at the first traffic light, continue straight and follow company signage. 

• From Charlottesville on Interstate 64 East 

1. Look for the Short Pump / Rt. 250 Exit.   
2. Take the first exit (Rt. 250 East), enter Rt. 250 and move immediately to the far left lane.   
3. Turn left at the first traffic light, continue straight and follow company signage. 

• From Norfolk on Interstate 64 West 

1. Pass through the city and look for the Short Pump / Rt. 250 Exit. Refer to the Downtown Richmond map.   
2. Take the first exit (Rt. 250 East), enter Rt. 250 and move immediately to the far left lane.   
3. Turn left at the first traffic light, continue straight and follow company signage.